› Rpm traxxas 7122 e revo wing

RPM73162 RPM Traxxas 1/16 E-Revo Axle Carriers (Black) RPM73162

These are the RPM Black Axle Carriers for the TRA 1/16 scale E-Revo and 1/16 scale Slash. FEATURES: Black plastic construction Stronger pivot ball mounting YOU WILL RECEIVE: One left and right axle carrier four molded caps eight 2x8mm flathead screws... more

RPM RPM73169 Axle Carriers for Traxxas .06th E-Revo-Slash-Rally - Red

For use on 1/16 Traxxas vehicles. Tech Notes: The small screws included with these Axle Carriers require the use of either a .050 or 1.25mm hex wrench (not included). Serious strength and rigidity while the chemical make up of our proprietary blend of... more

RPM RPM80602 Rear Upper and Lower A-Arms for Traxxas .06Th E-Revo - Black

This is a pair of optional RPM Rear Upper and Lower A-Arms for the TRA 1/16 scale Mini E-Revo. FEATURES: Nylon construction Black in color YOU WILL RECEIVE: One Rear Upper A-Arm One Rear Lower A-Arm Two 2x13mm socket head screws Instruction sheet... more

RPM R & C Products RPM81465 Front Right A-arms for the E-Revo 2.0 Brushless Truck - Blue

This is the Blue Front Right A-Arms for the Traxxas E-Revo 2.0 Features: 5g. per pair lighter than stock Stronger than stock Replaces stock Traxxas #8632 Includes: (2) Front A-Arms Blue Limited Lifetime Warranty against breakage Specs: Molded from our... more

RPM R/C Products 73992 Rear Bumper Black 1/16 E-Revo

At just over 2 wide stock 1/16th scale Traxxas Mini E-Revo bumpers just aren t large enough to provide any protection to the front or rear end of these cool little trucks. RPM has that problem solved with our new bumpers that measure in at a full 4... more

RPM R & C Products RPM81512 Front Left A-arms for the E-Revo 2.0 Brushless Truck - Black

While Traxxas may have beefed up the Revo 2.0 suspension arms they re still not nearly as tough as RPM versions nor are they as light. RPM A-arms weigh in 5 grams less than stock per side for a total weight loss of 10 grams! RPM geometry also has its... more

RPM R/C Products 80511 Rod Ends Long White TRA Nitro Slash

RPM Rod Ends cover a wide range of currently available Traxxas vehicles including all versions of the following: Slash 2wd Slash 4x4 Summit T-Maxx E-Maxx Revo e-Revo Slayer Pro 4x4 Stampede 4x4 Rustler VXL Jato and Bandit VXL. These rod ends are tough!... more

RPM R/C Products 73164 Axle Carriers Green: 1/16 TRA

Overview Traxxas released the 1/16th scale E-Revo in a Grave Digger version that just begs for more RPM green. RPM A-arms and axle carriers do the trick perfectly! Each RPM part is color matched to Traxxas molded green parts for a seamless blend of... more

RPM FR Upper & Lower A-Arms Green1/16 Grave Digger RPM80694 Electric Car/Truck Option Parts

Overview Traxxas released the 1/16th scale E-Revo in a Grave Digger version that just begs for more RPM green. RPM A-arms and axle carriers do the trick perfectly! Each RPM part is color matched to Traxxas molded green parts for a seamless blend of... more

RPM Front Upper/Lower A-Arms Red 1/16 ERV RPM80699 Electric Car/Truck Option Parts

Upon the release of the Traxxas 1/16th Scale Mini E-Revo we immediately started receiving requests for durability upgrades. What better place to start than the front A-arms? With our guaranteed unbreakable material and a proven A-arm design based off... more

RPM Front Bumpers Black 1/16 ERV RPM73982 Electric Car/Truck Option Parts

At just over 2 wide stock 1/16th scale Traxxas Mini E-Revo bumpers just aren t large enough to provide any protection to the front or rear end of these cool little trucks. RPM has that problem solved with our new bumpers that measure in at a full 4... more