You're in Building Supplies
Need a Personal Shopper?
Subscribe to
Bizrate emails for the hottest
deals & products,
PLUS a chance to
WIN $25
sign me up!
New winners chosen weekly.
No purchase necessary.
| Best Seller  | This is a 1-1/4 in. diameter concave Precision steel ball bearing roller replacement, used on several patio and wardrobe door roller assemblies. Precision rollers are made of hardened steel and have a sealed ball bearing race. It has a 7/32 in. built... ... more | go to store |
 | This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. single cylinder deadlock in... ... more | go to store |
| Best Seller  | This is a unique, one of a kind, trolley style roller assembly with two parallel 1-1/4 in. concave steel rollers in a stamped steel housing. Used on Guaranteed Products patio doors, it's unique housing fits into the bottom rail held in place by the two... ... more | go to store |
 | Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This sliding screen door corner... ... more | go to store |
 | This is an diecast plain back patio door roller assembly with a 1-1/2 in. concave Plastic ball bearing roller. The dimensions are 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a 10-32... ... more | go to store |
 | This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved Plastic ball bearing roller. It has a plain back housing that is 5/8 in. wide and 1 in. tall with two mounting tabs/hooks on the top. It is rear adjusting with a 1/4-20... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It is 3/4 in. wide with a 27/32 in. flare, 1-5/8 in. tall and 1-1/2 in. long (not including the inner roller housing). It is rear adjusting... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 23/32 in. wide with a 3/4 in. dimple width and 1-3/16 in. tall. It is rear adjusting with a threaded... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball-bearing roller. It has a plain back housing that is 3/4 in. wide and 1-1/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... ... more | go to store |
 | This door stop is constructed from diecast and comes finished in bronze colored paint. This residential door stop features a heavy-duty design strong enough for commercial applications. It includes a drop down leg with a rubber tip. This diecast door... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end and an optional use #10-32 threaded hole on top. Used by Fleetwood and a... ... more | go to store |
 | This sliding screen door roller assembly fits onto the spring-loaded arm of a Columbia corner insert. The roller housing is stamped steel with a 1 in. steel ball bearing roller installed. These rollers are a replacement roller for the discontinued... ... more | go to store |
 | Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This sliding screen door roller... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide and 1-1/8 in. tall with a 13/16 in. flare. It is rear adjusting with a 1/4-20 threaded mounting hole on... ... more | go to store |
 | This is a plain back tandem roller assembly with two 1 in. concave ball bearing rollers. The stamped steel housing is adjustable and is used by a variety of manufacturers of vinyl, aluminum or wood doors. The housing is 11/16 in. wide, 1-1/32 in. tall... ... more | go to store |
 | This sliding screen door roller is as common roller replacement for many sliding screen doors. It is a high density polyethylene ball bearing roller with a center groove. It is 1 inch in diameter and 1/4 inch thick with a 3/16 inch axle hole. Order... ... more | go to store |
 | This is a stainless steel S-tab tandem roller assembly used by Fleetwood and a variety of patio door manufacturers. It has an stainless steel inner housing with two inline 1-1/2 in. concave or grooved stainless steel ball bearing rollers set in a... ... more | FREE shipping go to store |
 | This is an diecast plain back patio door roller assembly with a 1-1/4 in. concave Plastic ball bearing roller used by Trimview and a variety of patio door manufacturers. It's diecast plain back housing is 11/16 in. wide, 1 in. tall and 2-5/8 in. long.... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 3/4 in. wide and 1-3/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide with a 7/8 in. flare and 1-3/16 in. tall. It is rear adjusting with a threaded mounting hole on the... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide, 1-1/4 in. tall and 2-3/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting... ... more | go to store |
 | This sliding patio door roller assembly is constructed from steel. It features a 1 In. ball bearing wheel with an adjustable steel housing. This type of roller assembly is quick and easy to install. Prime-Line | Prime-Line Single 1-1/8 in. Ball Bearing... ... more | go to store |
 | This is a sliding window in a black plastic housing with a flat-edged stainless steel ball-bearing roller. Features a stainless steel roller insert carrier. Prime-Line | Prime-Line Sliding Window Roller, 9/16 in. , Ball Bearing Roller 5.35 H x 3.75 W x... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The housing is 3/4 in. wide with a 7/8 in. flare and 1-1/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end. It is... ... more | go to store |
 | This is a plain back tandem roller assembly with two 1-1/4 in. concave steel ball bearing rollers. The stamped steel housing is adjustable. Used by Milgard as well as a variety of other vinyl patio door manufacturers. The housing is 3/4 in. wide and 1... ... more | go to store |
 | This is a U-tab patio door roller assembly with a 1-1/8 in. concave steel ball bearing roller in a stamped steel "U" back style housing. When installed the U-back housing is drawn tightly into position against the side stile as the mounting screw or... ... more | go to store |
 | This is a unique back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has the unique housing that is 15/16 in. wide and 1-5/16 in. tall. It is rear adjusting with a 10-24 threaded mounting hole and mounting... ... more | go to store |
 | This is a unique back patio door roller assembly with a 1-1/4 in. concave Plastic ball bearing roller. The stamped steel housing is 11/16 in. wide and 1-3/8 in. tall. It is rear adjusting with a set of tabs or ears that insert into slots in the door's... ... more | go to store |
 | This is a C-tab patio door roller assembly with a 1-1/4 in. diameter concave, or grooved, steel ball bearing roller. As the C-shaped tab fits around the corner screw, it is captured by the side stile and bottom rail as the screw draws the two sides... ... more | go to store |
 | This is a C-tab patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. As the C-tab is positioned around the corner screw, it is captured by the side stile and bottom rail as the screw draws the two sides together. The housing... ... more | go to store |
 | This is a F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... ... more | go to store |
 | This is a E-tab patio door roller assembly with a 1-1/8 in. concave steel ball bearing roller. As the corner screw passes through the E-tab it captures the roller assembly and positions it in the door's bottom rail. The housing is 19/32 in. wide with... ... more | go to store |
 | This is a E-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. As the corner screw passes through the E-tab it captures the roller assembly and positions it in the door's bottom rail. The housing is 19/32 in. wide with... ... more | go to store |
 | This is a F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab it is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is... ... more | go to store |
 | This is a F-tab patio door roller assembly with a 1-1/4 in. concave nylon ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... ... more | go to store |
 | Easily operate your screen door with the Prime-Line sliding screen door corner assembly. An all-in-one corner and roller combination, the corner fits into the frame to hold the bottom or top rails and the side stiles together. This assembly is used on... ... more | go to store |
 | This is two piece roller assembly used on Ador Hilite patio doors. The outer housing is 5/8 in. wide, 31/32 in. tall with a 11/32 in. flare width and has two hook tabs on top. The inner housing holds a 1-1/2 in. steel ball bearing roller. Together,... ... more | go to store |
 | Red bushing spiral balance, for the sash. Used to counter-weight the moving sash on single and double hung windows. Fits window styles that tilt in for cleaning. This spiral balance does not include an end clip and must be ordered separately.... ... more | go to store |
Ads related to Prime-Line 1-1/4 in. Ball Bearing, Plain Back, Roller Assembly Single Pack 9.35 H x 3.75 W x 0.65 D in brown in Zinc Plated | Wayfair D 1542
