You're in Home Hardware
Need a Personal Shopper?
Subscribe to
Bizrate emails for the hottest
deals & products,
PLUS a chance to
WIN $25
sign me up!
New winners chosen weekly.
No purchase necessary.
| Best Seller  | This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator. Finish: Bronze |... ... more | go to store |
 | This is a left-hand operator. Determined by viewing from inside of window looking out. Can be used on either awning or louver-type windows. Side mount design. | Prime-Line Diecast Left Hand RV Window Slant Sill Operator 5.4 H x 3.75 W x 1.8 D in black... ... more | go to store |
| Best Seller  | This is an awning operator of aluminum diecast construction with an aluminum painted finish used on Stanley windows. It is left-handed with a matching crank handle with an offset link arm. It has a reversed L-shaped mounting hole pattern with one hole... ... more | go to store |
 | This casement window operator is a left-handed bronze square body type. It has an 8 in. steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the Prime-Line part H 3529 casement track are... ... more | go to store |
 | These pivot hinge pins are constructed of steel and come in a zinc-plated finish. They feature a knurled (grooved) and female 10-24 threaded end on one side, and a deburred end on the other. This pivot hinge pin has a 3/8 inch outside diameter and... ... more | go to store |
 | Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This is a black flush mounted handle and latch set used by a wide variety of sliding screen door manufacturers. It has a steel hook latch with 1 inch... ... more | go to store |
 | This is a jalousie operator that has an aluminum finish and diecast construction. Mounting holes are 4-3/4 in. or 3-7/8 in. on center. It has a reversible, non-handed design that can be used on either left or right-handed installations. The 3 link arms... ... more | go to store |
 | This screen retainer spline is constructed of top quality vinyl that is round in shape. It features a hollow core center, it is serrated on its exterior surface, and it is black in color. Vinyl screen retainer spline like this one is used to hold... ... more | go to store |
 | This patio door handle set has matching inside and outside pulls. It features a white finish that is non-handed and used by a variety of manufacturers. This is a low profile non-keyed handle set. | Prime-Line Diecast, Patio Door Handle (Single Pack)... ... more | FREE shipping go to store |
 | These door viewer covers are constructed of solid brass and come in optional finishes. They feature a 9/16 inch inside diameter and fit over door viewers constructed with 9/16 inch outside diameter cylinders. Privacy covers like these can be used with... ... more | go to store |
 | These door viewer covers are constructed of solid brass and come in optional finishes. They feature a 9/16 inch inside diameter and fit over door viewers constructed with 9/16 inch outside diameter cylinders. Privacy covers like these can be used with... ... more | go to store |
 | This casement window operator is a right-handed, aluminum, surface mount body type with four mounting holes in the top of the body and mounts directly onto the sill. It has a 9 in. steel arm with a round disc on the tip. The disc slides in the... ... more | go to store |
 | This casement window operator is a right-handed, aluminum, surface mount body type with four mounting holes in the top of the body and mounts directly onto the sill. It has a 9 in. steel arm with a round disc on the tip. The disc slides in the... ... more | go to store |
 | This is a project-in (or push-in) locking handle used on steel windows. It is right-handed with a 7/16 in. hook projection. The mounting holes are 1-3/8 in. on center and it is a heavy white bronze casting. | Prime-Line Project-In Locking Handle, Left... ... more | FREE shipping go to store |
 | This Defender Security brass single-cylinder surface deadbolt features a sturdy steel bolt and a security strike that anchors to the jack stud behind your door jamb. Features a sturdy steel bolt secured in a diecast housing, finished in a brass colored... ... more | go to store |
 | This split shaft, folding operator crank handle is constructed of diecast zinc and comes in a bronze painted finish. It is designed to fold over when not in use, allowing for unobstructed use of shutters, shades and blinds of various types. This... ... more | go to store |
 | This is an outside door pull that improves grip for opening door from outside. The 4-15/16 in. hole pattern is offset 1/8 in. from center line to work with Adams Rite, W and F and similar type mortise latches. The 3-15/16 in. hole centers work with... ... more | go to store |
 | This sliding patio doorkeeper is constructed from diecast and comes plated in aluminum. It features a face mount design with vertical slots that allow for adjustment. This keeper comes complete with fasteners for a quick and easy installation. |... ... more | go to store |
 | This is a sash lock and keeper. Constructed from diecast zinc it comes in a finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum... ... more | go to store |
 | This is a multifunctional diecast locking patio door outside pull. Spacing for mounting was designed to work on Adam Rite, W & F and other similar type mortise latches. Non-handed design for use on right or left-handed patio doors. The tailpiece is... ... more | go to store |
 | This sliding door handle is constructed from diecast and comes finished in white. It features an inside pull with steel latch and an offset outside pull. It has a keeper and features a non-keyed design. | Prime-Line Sliding Door Handle, Diecast (Single... ... more | FREE shipping go to store |
 | This split shaft, folding operator crank handle is constructed of diecast zinc and comes in a bronze painted finish. It is designed to fold over when not in use, allowing for unobstructed use of shutters, shades and blinds of various types. This... ... more | go to store |
 | This is a deadbolt used on commercial aluminum or steel doors. It is a single point lock with a pivoting laminated steel bolt. The bolt is activated by a pivoting mechanism by the key cylinder or thumb turn. It comes with a faceplate and fasteners. The... ... more | go to store |
 | This unique product is the most versatile locking unit available; it will accommodate 7 different hole spacing patterns | Prime-Line Sliding Door Outside Pull, w/ Key Diecast (Single Pack) 11.55 H x 5.1 W x 1.25 D in Black | 11.55" H X 5.1" W X 1.25" D... ... more | FREE shipping go to store |
 | This is a drop-down door holder with a rubber tip. Features a 3-hole mounting, with a spring-loaded design that retracts in the up position when not in use. Finish: Bronze | Prime-Line Diecast Finish, Drop Down Door Holder (Single Pack) 8.4 H x 3.75 W... ... more | go to store |
 | This split shaft, folding operator crank handle is constructed of diecast zinc and comes in a bronze painted finish. It is designed to fold over when not in use, allowing for unobstructed use of shutters, shades and blinds of various types. This... ... more | go to store |
 | This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. All the necessary installation... ... more | go to store |
 | This is a universal folding crank handle that fits most casement operator crank spindles. It is diecast construction. The universal spline system fits most casement operators. It is easy to install. The folding design is often used to replace the... ... more | go to store |
 | This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are... ... more | go to store |
 | Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This right-handed sliding screen door latch and pull is constructed of diecast and it comes in a beautiful chrome plated finish. It is a surface-mounted... ... more | go to store |
 | This sliding patio door handle set is constructed of mixed materials including wood and diecast components, and it is designed to fit 90% of all internally latching type doors using a 3-15/16 in. hole center spacing. The outside non-keyed locking pull... ... more | go to store |
 | Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This left-handed sliding screen door latch and pull is constructed of diecast and it comes in a beautiful chrome plated finish. It is a surface mounted... ... more | go to store |
 | This is a drop-down door holder with a rubber tip. Features a 3-hole mounting, with a spring-loaded design that retracts in the up position when not in use. Finish: Bronze | Prime-Line Diecast Finish, Drop Down Door Holder (Single Pack) 8.4 H x 3.75 W... ... more | go to store |
 | Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This right-handed sliding screen door latch and pull is constructed of diecast and it comes in a beautiful chrome plated finish. It is a surface-mounted... ... more | go to store |
 | This white patio door handle is a surface with a hook latch style. Often found on older style patio doors, it is mounted on the door's inside the frame and the hook latch catches the keeper mounted on the jamb. It has a 1-1/8 in. high profile extruded... ... more | go to store |
 | Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This right-handed sliding screen door latch and pull is constructed of diecast and it comes in a beautiful chrome plated finish. It is a surface-mounted... ... more | go to store |
 | This is a step-on designed plunger style door holder with a rubber tip. The painted aluminum diecast housing is operated with your foot and is spring-loaded. It has a rubber treadle on top for easy step-on application to lock the plunger down. The... ... more | go to store |
 | This is a left-handed casement locking handle in a gray painted finish with 2-3/8 in. mounting holes. The handle is diecast construction with the handle sweeping slightly to the left. This allows a more comfortable grip to open to the left when there... ... more | go to store |
 | This operator cover is constructed from diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the truth entrygard operator. Finish: White |... ... more | go to store |
Ads related to Prime-Line Entrygard Operator Diecast Cover, Snap-On Design Single Pack 7.8 H x 4.8 W x 1.75 D in brown in Bronze | Wayfair TH 22232
